Watfitt.shp is a point shape file which contains the City of Bellingham's Water Fitting data for the following fittings: Tees, Crosses, Reducers and Caps.
The Point Attribute Table stores the fitting type, number, coordinates, source, etc. Note: Only item fields of interest are shown in table below. All internal fields have not been described.
| Item | Type | Length | Description |
|---|---|---|---|
| fitt-type | Integer | 9 | Letter designated valve types: T = Tee, R = Reducer, C = Cap, X = Cross. |
| unitid | Character | 6 | User assigned unique number for each point. |
| easting | Float | 8 | GPS collected easting coordinate of asset. |
| northing | Float | 8 | GPS collected northing coordinate of asset. |
| elev | Float | 8 | GPS collected elevation of asset. |
| map# | Character | 10 | Quarter section number. |
| accuracy code | Integer | 8 | Code corresponding to a range of measurements of accuracy of actual location of asset versus shown placement of asset on map. |
| source code | Integer | 4 | Code representing the source of the information used to place the asset on the map. |
| project# | Character | 10 | Construction project number from which the asset was installed. |
The coverage was originally (1991) digitized in AutoCAD from 1:1200 Water map pages. The digitized quarter section drawings were adjusted to known section and quarter section coordinates. In 1995, the AutoCAD maps were again adjusted to best fit with surveyed centerline data. In 1996, the AutoCAD information was converted to ArcInfo by city staff. Since 1998, all water assets have been located using survey grade GPS. The coverage is continually updated and enhanced as we receive new source data and correction information.
| Projection | Stateplane, Washington North |
| Units | Feet |
| FIPSZone | 4601 |
| Datum | NAD27 |
| Spheroid | Clarke 1866 |
| Xshift | 609601.21920 |
| Yshift | 0.0 |
| Parameters | None |
Xmin = 1580712.173
Ymin = 607788.264
Xmax = 1628041.420
Ymax = 666579.328
The City of Bellingham Public Works Department has developed this data and maps for its own use and is not responsible for use by others. Therefore, the City of Bellingham makes no guarantees as to the quality, completeness or accuracy of the data.
Persons using this data do so at their own risk and agree to defend, indemnify, and hold harmless the City of Bellingham as to any claims or suits arising out of such use.
The data is the property of the City of Bellingham and is intended to be used by the receiving person(s) only and not to be redistributed or reproduced without the City of Bellingham's permission.
By accepting and using this data, you are indicating your acceptance to the conditions and requirements stated above.
By downloading the data offered online I agree that I have read and understood the above statement.
Three files are necessary to view a shape file in ArcView or ArcExplorer. The files must all be stored in the same directory. The following three files have been zipped together in watfitt.exe:
Click on the link below to download the zipped file. The files will automatically unzip when the downloaded filed has been executed.
Download watfitt.exe
